Descargar Imprimir esta página

KTM 95812932044 Instrucciones De Montaje página 20

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

5 ASSEMBLY
5.1
8
Assembly
Warning
Danger of accidents Loading luggage can significantly affect the handling characteristics.
When the cases are fitted, the handling characteristics, as well as the cornering and braking charac-
teristics, may change due to greater crosswind sensitivity, especially when they are fully laden. Take
care in strong winds. Due to the changed handling characteristics, approach the permitted maximum
speed of 120 km/h slowly.
Warning
Danger of accidents Never exceed the payload of 5 kg per case.
Always use both side cases and distribute the load evenly on both sides, as well as securing them
against slipping.
Info
The side cases can only be installed in combination with the side case carrier set (not included).
501409-01
501410-01
501411-01
Assembly both sides
Position the case with the guides on the guide pins
the side case.
4
Push down the lever
are fully seated in the guides.
The guide pins are firmly seated in the guides.
Make sure that all accessory parts and luggage are care-
fully attached. Check this regularly.
Always use both side cases and distribute the load evenly
on both sides.
Info
Textiles may undergo slight color changes and fade
if exposed to prolonged and intense sunlight. This
cannot be avoided despite the use of high quality
materials which is why KTM accepts no liability for
this. We thank you for your understanding.
Removing the cases
4
Press the lever
down, push the case forward and
remove it.
3
and the case until the guide pins
of

Publicidad

loading