MAGIC REMOTE FUNCTIONS
This item is not included for all models.
When the message "Magic Remote battery is low. Change the battery." is
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA)
matching
and
ends to the label inside the compartment, and close the
battery cover. Be sure to point the remote control toward the remote control
sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
(Only UB80**, UB82**, UB83**, UF695*)
(POWER)
Turns the TV on or off.
Navigation buttons
(up/down/left/right)
Press the up, down, left or right button
to scroll the menu.If you press
,
,
or
buttons while the pointer is in
use, the pointer will disappear from the
screen and Magic Remote will operate
like a general remote control. To display
the pointer on the screen again, shake
Magic Remote to the left and right.
Wheel(OK)
Press the center of the Wheel
button to select a menu. You can
change programmes by
using the Wheel button.
Coloured buttons
These access special functions in
some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
Adjusts the volume level.
MAGIC REMOTE FUNCTIONS
(BACK)
Returns to the previous level.
(Home)
Accesses the Home menu.
(EXIT to LIVE)
Swiches among broadcast
(antenna) and various inputs.
(Voice recognition)
(Depending on model)
P
Scrolls through the saved
programmes.
/ INPUT
Displays the Screen Remote.
* Accesses the Universal Control
Menu. (Depending on model)
* Pressing and holding the
/ INPUT button will
display a menu to select
an external device that is
connected to the TV.
Used for viewing 3D video.
(Only 3D models)
(MUTE)
Mutes all sounds.
* By Pressing and holding the
button, audio descriptions
function will be enabled.
(Depending on model)
23