Publicidad
Idiomas disponibles
Idiomas disponibles
When servicing the blades be aware that, even though
the power source is switched off, the blades can still
be moved.
The blade on the product is very sharp. Use extreme
caution and wear heavy duty gloves when fitting,
replacing, cleaning or checking bolt security.
Replace damaged blades and bolts in sets to preserve
balance.
RISK REDUCTION
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices are
all thought to contribute to the development of the these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
After each period of operation, exercise to increase
blood circulation.
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
KNOW YOUR PRODUCT
See page 132.
Parts
1. On/off button
2. Handle
3. Motor control cable
4. Cord retainer
5. Height adjustment lever
6. Battery door
7. Cord hook
8. Grassbox full indicator
9. Grassbox
10. Quick release fastener
11. Rear wheel
12. Front wheel
13. Isolator key
14. Mulching plug
15. Battery pack
16. Battery charger
17. Power cord
18. Start button
4
| English
SYMBOLS ON THE PRODUCT
Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Wear ear protection.
Wear eye protection.
Do not operate on inclines greater than
15°. Mow across the face of slopes,
never up and down.
Do not expose to rain or damp condition.
Beware of sharp blades. Blades
continue to rotate after the motor is
switched off – Remove isolator key
before maintenance
Beware of sharp blades. Blades
continue to rotate after the motor is
switched off – Remove plug from
mains before maintenance or if cord is
damaged.
Keep all bystanders, especially children
and pets, at least 15m away from the
operating area.
the cutting blades.
Press the Start button and then the
On-off button (A, B, C or D) to start the
product. Release the Start button and
keep pressing the On-off button to run
the product. Release the On-off button
to stop the product.
Go
Stop
Power supply: Battery ( DC 18V )
Power supply: Electric ( AC 230V )
Publicidad
