OPERATION
Reference must be made to chemical manufacturer's
•
instructions for the preparation of the culture medium and cell
culture techniques.
The BS-200-4-500 may be used with a water bath, MWB-12L,
•
and this is described in a separate leaflet.
Place the primed culture vessels in position over the location
•
bosses on the platform.
Set the "rpm" control to the required speed.
•
Set the "interval/continuous" switch for periodic or continuous
•
stirring as required.
If interval stirring is selected, set the stirring periods to the on/off
•
stirring times required.
Switch on to start the attachment phase.
•
At the end of the attachment phase, reset the interval/continuous
•
switch and the stirring time controls as appropriate for the growth
phase.
At the end of the growth phase switch off and allow the stirrer to
•
stop before removing the vessels.
24