Publicidad
Idiomas disponibles
Idiomas disponibles
1
Drive Control Lever
2
Drive Speed/Gear Control
3
Knob
4
Auger Control Lever
5
Chute Rotation Handle
6
Clean Out Tool
7
Discharge Chute Deflector
8
Discharge Chute
9
Auger Housing
20
21
Drive Control Lever
Located on the right side of the upper handle, the Drive Control Handle is used to engage and
disengage the drive wheels. Squeeze the Drive Control Handle against the upper handle to engage the
wheels; release to disengage.
Drive Speed/Gear Control
The Speed/Gear Control is located on the center of the panel and is used to set the drive speed and
direction of travel. It can be moved into any of eight positions (six forward and two reverse gear
settings)
Auger Control Lever
Located on the left side of the upper handle, the Auger Control Handle is used to engage and
disengage the augers. Squeeze the Auger Control Handle to engage the augers; release to disengage
the augers.
Chute Rotation Handle
To adjust snow discharge direction, rotate the handle clockwise or counter-clockwise.... should
rotate 180 degrees.
Skid Shoe
Position the shoes based on the surface conditions. Adjust upward for hard-packed snow. Adjust
downward when operating on gravel or crushed rock surfaces.
20
21
22
Fuel Tank Cap
Primer Bulb
10
Auger Blade
11
Skid Shoe
12
Tire
13
Belt Cover
14
Electric Start Button
15
Lower Handle
16
Recoil Start Handle
17
Handle Nut
18
Oil Dipstick
19
Light
23
22
Switch Key
23
Choke Lever
8
Publicidad
