Descargar Imprimir esta página

SEVERIN CY7086 Manual De Instrucciones página 23

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
Push filter screen back into the dust container.
4.
5.
Close dust container and reinsert into the appliance. Dust container clicks into place.
Cleaning the exhaust filter
5
5.
Reattach cover to appliance.
Wait until exhaust filter is completely dry before reinserting it. Otherwise germs and mould may form.
ˆ
Cleaning the appliance
ˆ
Before cleaning, switch off the appliance and disconnect the power plug from the socket.
ˆ
The housing and connection cable may not be handled with liquids or immersed in liquids for reasons of
electrical safety. Wipe housing with a slightly damp cloth and then rub dry.
ˆ
Do not use any sharp, scouring cleaners or hard brushes for cleaning.
For additional cleaning tips, see > illustrated Quick Start Guide.
5 Spare parts/accessories
You can easily order spare parts or accessories online at www.severin.de in the "Service > Ersatzteil-Shop"
(Spare Parts Shop) menu.
Order number
0684048
5161048
4217048
1.
Push both locks on the back of the appliance downward and remove
cover (Fig. 5).
Pull out exhaust filter by the tab.
2.
Rinse exhaust filter thoroughly under running water (maximum 40 °C)
3.
and allow to dry for at least 48 hours at room temperature.
The exhaust filter is washable, but neither dishwasher-safe nor wash-
ˆ
ing machine-safe.
Reinsert exhaust filter.
4.
Dual motor filter
Filter screen
Filter set, 3 parts
s
/
Pare ParTs
accessories
Accessory/spare part
23

Publicidad

loading