Publicidad
Idiomas disponibles
Idiomas disponibles
Surface burners
Burner controls
Make sure all surface burner knobs are in the OFF position.
CAUTION
•
Do not clean the control knobs in a dish washer.
•
Do not spray cleansers directly onto the control panel. Moisture entering the
electric circuits may cause electric shock or product damage.
NX7000K_VE_NX58M6850SS_AA_DG68-00909A-02_EN+MES+CFR.indb 39
1.
Pull the knobs off the control valve
stems as shown.
2.
Clean the knobs in warm, soapy water.
Then, rinse and dry them thoroughly.
Clean the stainless steel surfaces using
3.
stainless steel cleaner.
4.
Push the knobs back onto the control
valve stems.
Cooktop surface
The porcelain-enameled cooktop surface needs to be kept clean. We recommend
that you remove food spills immediately after they take place.
1.
2.
3.
4.
CAUTION
Do not use a steel-wool pad or abrasive cleaner, which can scratch or damage
•
the enamel surface.
•
Do not remove the cooktop surface to clean it. The gas lines leading to the
burner manifolds can be damaged, resulting in a fire or system failure.
Turn off all surface burners.
Wait until all burner grates cool down,
and then remove them.
Clean the cooktop surface using a soft
cloth. If food spills run into the gaps
of the burner components, remove the
burner cap and the head, and then wipe
up the spills.
When cleaning is finished, re-install the
burner components, and then put the
burner grates into position.
English 39
2017-10-17
3:45:00
Publicidad
