Publicidad
Area
Press this key once. This symbol
displayed.
Press key and take the first measurement (e.g.
ON
DIST
length)
Press key again and take the second measure-
ON
DIST
ment (e.g. width)
The result is displayed in the main line.
Volume
Press this key twice.This symbol
displayed.
Press key and take the first measurement (e.g.
ON
DIST
length)
Press key again and take the second measure-
ON
DIST
ment (e.g. width)
The area of the two values measured is displayed in
the main line.
Press the key to take the third measurement
ON
DIST
(e.g. height). The value is displayed in the
second line.
The resulting volume is displayed in the main line.
TLM160 1.0.0 gb
All manuals and user guides at all-guides.com
Staking out of constant distances
Constant distances can be entered for staking out
is
purposes. The TLM160's display shows the to be
staked out distance as well as multiples of the
distance. As soon as the defined stake out distance
is reached the TLM160 beeps.
Inputting a stake out distance: Press and hold the
Change the value in the main line with
keys until the desired staking out distance is
displayed. Holding the
is
up the adjustment.
By pressing the
multiples of it are displayed in the auxiliary line; the
laser measuring starts. In the main line the distance
between the staking out point (in the auxiliary line)
and the TLM160 (rear measuring reference) is
displayed.
If the TLM160 is moved along the staking out line, the
displayed distance is reduced. At a distance of 0.1 m
to the next staking out point the TLM160 starts to
beep. As soon as the staking out point is reached, the
beep changes and the auxiliary line starts to blink.
Repeat this procedure as often as needed.
The function is stopped by pushing the
3
, key, the auxiliary line will blink with crosslines.
and
key the staking out distance or
ON
DIST
D
GB
F
I
E
P
NL
and
DK
down will speed
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
key.
LT
LV
EST
TR
Functions
RO
BG
Publicidad
