Listening To The Sound From A; Device; Bluetooth Connection - Yamaha ATS-1050 Manual De Instrucciones

Listening to the sound from a

device

You can play back wirelessly from Bluetooth devices, such as a smartphone or digital
music player.
See also the operating manual of the
Perform the following steps to use a Bluetooth device with the sound bar.
For the first Bluetooth
connection
Pairing a Bluetooth device
with the sound bar
Playing back audio from a Bluetooth device
10
device for more details.
devices
For subsequent

Bluetooth connection

on the sound bar
Pairing a device with the sound bar
When connecting to a device for the first time, "pairing" between the device
and sound bar is required. "Pairing" is necessary for each
Once "pairing" with a device is completed, subsequent connection with that device will
not require "pairing."
1
Press the BLUETOOTH key on the sound bar's remote control to
select Bluetooth as the input source.
The BLUETOOTH indicator on the top panel flashes.
Flashes
2
Turn on the Bluetooth function of the device to be paired, and
perform pairing.
The operation varies depending on the device. Refer to the operation manual of the
device.
3
Select "ATS-1050 Yamaha" in the Bluetooth device list on the device.
If a passkey (PIN) is required, enter the number "0000."
When pairing is completed, or a completion message appears on the device.
NOTE
• Perform pairing with the device and sound bar within 10 meters (33 ft) of each other.
• Up to eight devices can be paired with the sound bar. If a ninth device is paired, pairing data for
the device with the oldest connection date will be deleted.
• If pairing information for a device is deleted, to use that device again, pairing of the device is required
again.
• If a device is already connected to the sound bar, terminate that
then perform pairing with the new device.
• Refer to " " (p.18) in "Troubleshooting" if pairing cannot be achieved.
device you use.
connection (p.11),