problem
• Unit will not start.
installation.
• Battery pack will not charge. • Battery pack not inserted into charger. • Insert battery pack into
• Unit shuts off abruptly.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK+DECKER help line at
1-800-544-6986.
tRoubLesHootING
possible Cause
• Battery pack not installed properly.
• Battery pack not charged.
• Attachment is not secured.
• Charger not plugged in.
• Surrounding air temperature
too hot or too cold.
• Battery pack has reached its
maximum thermal limit.
• Out of charge. ( to
maximize the life of the
battery pack it is designed
to shutoff abruptly when
the charge is depleted.)
Black & Decker (U.S.) Inc.,
Towson, MD 21286 U.S.A.
Imported by:
701 E. Joppa Rd.
8
possible solution
• Check battery pack
• Check battery pack charging
requirements.
• Make certain the attachment
is fully pushed into the Power
Unit.
charger until LED illuminates.
• Plug charger into a working
outlet. Refer to "Important
Charging Notes" for more
details.
• Move charger and battery
pack to a surrounding air
temperature of above
40 degrees F (4,5°C) or below
105 degrees F (+40,5°C).
• Allow battery pack to cool
down.
• Place on charger and
allow to charge.