Operation
PULL CHAIN OPERATING INSTRUCTIONS
Attach the two pull chains and fobs (HH) to the pull chains located
on the light kit panel. Turn on the power and check the operation
of the fan.
The pull chain controls the fan speed as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low and 4 pulls - Off.
Speed settings for warm or cool weather depend on factors such
as the room size, ceiling height, number of fans, and so on.
To turn the light kit on or off, pull the chain (HH) that is attached to
the light kit panel.
REVERSE SWITCH OPERATING INSTRUCTIONS
The reverse switch is located on the surface of the motor assembly.
This switch controls directions: forward (switch left) or reverse
(switch right).
NOTE: Wait for the fan to stop before reversing the direction
of the blade rotation.
Warm weather - (Counterclockwise Direction) A downward air flow
creates a cooling effect. This allows you to set your air conditioner
on a warmer setting without affecting your comfort.
Cool weather - (Clockwise Direction) An upward air flow moves
warm air off the ceiling. This allows you to set your heating unit on
a cooler setting without affecting your comfort.
15
Please contact 1-800-986-3460 for further assistance.
HH
HOMEDEPOT.COM/HOMEDECORATORS