Peg-Perego RAIDER Empleo Y Manutencion página 7

• Non usare il veicolo su strade pubbliche, dove c'è
traffico e macchine parcheggiate, su pendenze
ripide, vicino a gradini e scale, corsi d'acqua e
piscine.
• I bambini devono sempre indossare scarpe
durante l'uso del veicolo.
• Quando il veicolo è operativo fare attenzione
affinché i bambini non mettano mani, piedi o altre
parti del corpo, indumenti o altre cose, vicino alle
parti in movimento.
• Non bagnare mai componenti del veicolo come
motori, impianti, pulsanti, etc.
• Vicino al veicolo non usare benzine o altre
sostanze infiammabili.
• Il veicolo deve essere usato esclusivamente da un
solo bambino.
REGOLE PER UNA GUIDA SICURA
DIVERTIMENTO SENZA INTERRUZIONI: tenete
sempre un set-batterie carico di ricambio pronto
all'uso.
Per la sicurezza del bambino: prima di azionare il
veicolo, leggere e seguire attentamente le seguenti
istruzioni.
• ATTENZIONE:
Controllare che tutte le borchie di fissaggio delle
ruote siano ben salde.
• MARCIA AVANTI:
Con entrambe le mani sul manubrio premere il
pedale dell' acceleratore;
il veicolo si mette in moto ad una velocità di circa
4 Km/h.
• FRENO:
Per frenare alzare il piede dal pedale acceleratore,
il freno entrerà in funzione automaticamente.
Insegnate al vostro bambino un uso corretto del
veicolo per una guida sicura e divertente.
• Prima di partire assicurarsi che il percorso sia
sgombro da persone o cose.
• Guidare con le mani sul manubrio e guardare
sempre la strada.
• Frenare per tempo per evitare scontri.
• ATTENZIONE! se il veicolo agisce in condizioni
di sovraccarico, come su sabbia soffice, fango o
terreni molto sconnessi, l'interruttore di
sovraccarico toglierà immediatamente
potenza. L'erogazione di potenza riprenderà
dopo alcuni secondi.
PROBLEMI?
IL VEICOLO NON FUNZIONA?
• Verificare che non ci siano cavi scollegati sotto la
piastra dell' acceleratore.
• Controllare il funzionamento del pulsante
dell'acceleratore ed eventualmente sostituirlo.
• Controllare che la batteria sia attaccata all'
impianto elettrico.
IL VEICOLO NON HA POTENZA?
• Caricare le batterie. Se dopo la ricarica il problema
persiste far controllare le batterie ed il
caricabatterie da un centro assistenza.
ENGLISH
• PEG PEREGO® thanks you for choosing this
product. For over 50 years, PEG PEREGO has been
taking children for an outing: first with its famous
baby carriages and strollers, later with its pedal and
battery operated toy vehicles.
• Read this instruction manual carefully to learn the
use of this vehicle and to teach your child safe and
enjoyable driving. Please keep this manual for use
as a reference in the future.
• Our toys conform with the safety requirements
provided by the Council of the EEC, of the T.Ü.V.; of
the I.I.S.G. Istituto Italiano Sicurezza Giocattoli, and
the U.S. Consumer Toy Safety Specification F963.
Peg Perego S.p.A. is an ISO 9001
certified company.
The fact that we are certified provides
a guarantee of our honesty for our
customers, and fosters trust in the
company's way of working.
• Peg Perego reserves the right to modify or change
their product. Price, literature, manufacturing
processes or locations or any combination of these
above mentioned entities may change at any time
for any reason without notice with impunity.
Years 2-4
CUSTOMER SERVICE
PEG PEREGO offers after-sales services, directly or
with a network of authorized service centers for
repairs or replacement parts. See the back cover of
this instruction manual for a list of service centers.
Peg Perego is at the consumer's service, meeting
every need in the best way possible. This is why our
customers' opinions are so important and valuable
to us. We would be very grateful if you would kindly
fill in the CUSTOMER SATISFACTION
QUESTIONNAIRE after using one of our products.
You will find the questionnaire on the Internet at
"www.pegperego.com".
Please note any observations or suggestions you
may have on the questionnaire.
ASSEMBLY INSTRUCTIONS
ADULT ASSEMBLY REQUIRED.
USE CARE WHEN UNPACKING AS COMPONENTS TO
BE ASSEMBLED MAY POSE A SMALL PARTS/SHARP
EDGE HAZARD.
BATTERY ALREADY INSTALLED IN VEHICLE.
ASSEMBLY
1 • Dampen the inner part of the handle grips with
liquid soap and slide onto the handlebars.
2 • Apply the silver adhesive to the headlight, then
press the glass into place.
3 • Apply the silver adhesives to the 2 side
indicators and then press the indicator glass
panels into place.
4 • Fit the two fake mirrors into their seats inside
the front cover.
5 • Press the mirror frames into place.
6 • Insert the front mudguard onto the front cover,
taking care that both are facing in the correct
direction.
7 • Slide the 2 fork pieces onto the prongs of the
fork, pushing until they hook onto the
mudguard, paying attention to the profile in
order to avoid confusion between left and
right.
8 • With the mudguard and front cover held
together, proceed to insert this onto the bike
frame.
9 • Insert the pin to fix the handlebars to the
frame.
10 • Complete fixing the headlight-handlebar group
by inserting the nut into its seat under the
mudguard and screw firmly.
11 • Slot the windshield onto the front cover (A) and
screw on (B).
12 • Press on the 2 front hubcaps, taking care that
the hubcap pin is correctly fitted into the hole
in the wheel.
13 • Fit the front wheel by inserting the pin
provided, as in the drawing.
14 • Position the conical tool onto the part of the
pin already provided with a rounded stud, as
shown in the drawing. Insert the stud into the
special cylindrical tool and hammer home in
order to fix the wheel firmly.
15 • Plug battery terminal A into vehicle wiring
terminal B.
16 • Assemble the seat, attaching it first in front.
17 • Then secure the screw. The vehicle is ready to
use.
VEHICLE FEATURES AND INSTRUCTIONS FOR
USE
18 • ACCELERATOR/ELECTRIC BRAKE PEDAL: The
vehicle brakes automatically when your child
lift his/her foot off the pedal.
REPLACING THE BATTERY
19 • Unscrew the saddle safety screws. Lift up the
saddle.
20 • Unplug vehicle wiring terminal A from battery
terminal B, by pressing terminals on side and
pulling apart.
21 • Unscrew and remove battery cover.
22 • Replace the battery. (NOTE: The replacement
battery – separately available – is a 6Volt/8Ah
battery pack).
23 • Insert the wires of the battery and electrical
system into the holes in the battery cover.
Replace and screw back on the battery cover.
Connect the two plugs. When you have
finished, remember to close and screw down
the saddle. CAUTION: Always reclose the seat,
turn the fastener after doing anything inside
the battery compartment.
BATTERY RECHARGE
WARNING: BATTERY CHARGING AND EVERY OTHER
OPERATION ON THE ELECTRICAL SYSTEM MUST BE
CARRIED OUT BY ADULTS ONLY.
THE BATTERY CAN ALSO BE CHARGED WITHOUT
REMOVING IT FROM THE TOY.
24 • Unplug vehicle wiring terminal A from battery
terminal B, by pressing terminals on side and
pulling apart.
25 • Plug the battery charger terminal to a wall
outlet following the instructions enclosed.
Connect the plug B to the battery charger plug
C. Once the charge is completed unplug
recharger from wall outlet. Unplug recharger
cord terminal C from battery terminal B.
26 • Plug battery terminal A into vehicle wiring
terminal B. Close saddle.
BATTERY MAINTENANCE AND SAFETY
Before riding, charge your batteries for 18 hours to
initiate them. Failure to do this will result in
permanent battery damage.
CAUTION
Only adults should recharge batteries,never
children.
Never allow children to handle batteries.
Do not mix old and new batteries.
CHARGE BATTERY
• Charge the batteries no longer than 24 hours,
following the instructions enclosed with the
battery charger.
• Charge the battery, as the vehicle shows low
power, in this way you will avoid damage to the
battery.
• If you don't use your vehicle for a long period of
time unplug the battery from the main wire
harness of the vehicle. Remember to charge the
battery at least every three months.
• Never charge the battery upside down.
• Do not forget batteries during charging! Check
them periodically.
• Never use a replacement recharger or batteries
unless they are approved by PEG PEREGO.
• Batteries are sealed and maintenance free.
• Battery polarity must be observed when
connecting battery to wiring.
WARNING
• BATTERIES CONTAIN TOXIC AND CORROSIVE
SUBSTANCES. DO NOT TAMPER WITH THEM.
• Batteries contain an acid-based electrolyte.
• Do not make direct contact between battery
terminals, as this can cause an explosion or fire.
• Charging produces explosive gases. Charge
batteries in a well ventilated area away from
sources of heat and flammable materials.
• Exhausted batteries are to be removed from the
vehicle.
• Do not place the batteries near clothing to avoid
damage.
• Use only the recommended type of batteries and
storage batteries, or the equivalent.