Volpi PV400 Manual Del Usuario página 36

Turn on the pruner. Open the blade and
disconnect the shears. Loosen the screw of the
adjustment clip with a metric Allen key 4 (1).
Remove the screw (1) from the adjustment clip
and the adjustment clip (2). Loosen the gear
nut with a wrench and remove the adjusting
gear nut (3). Remove the center screw (4).
Remove the cover (6).
Clean the old grease (9) and apply grease on
the counter blade (10).
36
Unscrew the cover screws (5).
Remove the blade (7) and apply grease (8) on
the teeth.
Insert the blade again (11).