Technical Characteristics; Operating Conditions; Storage Conditions - FLAEM Smarty Manual De Instrucciones

8 - TECHNICAL CHARACTERISTICS

Smarty Electronic Nebuliser Model P0315EM
Power Supply
Power
Transducer frequency
Noise level (at 1 m)
Device dimensions
Device weight (excluding batteries)
Carry bag dimensions
Delivery rate ml/min
Characterization * MMAD
Breathable fractions < 5 μm (FPF):
Medication cup capacity
(1) The nebulising speed has been measured with a 0.9% saline solution at 23° C according to the
internal Flaem procedure I29-P07.5. It may vary according to the nebulising head supplied, medicinal
product and environmental conditions. Values shown for the aerosol delivery may also vary depending
on the patients respiratory Capacity.
* Please visit Smarty.Flaem.it or contact Flaem Nuova S.p.A Via Colli Storici, 221 25015 S. Martino della
Battaglia (BS) Italy - Tel +39 030 9910168 for information concerning nebulisation characteristics.
APPLIED PARTS
The BF type applied parts are:

9 - OPERATING CONDITIONS

Temperature
Air humidity
Atmospheric Pressure

10 - STORAGE CONDITIONS

Temperature
Air humidity
Atmospheric Pressure
If the appliance is stored at a temperature other than indicated under the
storage conditions, leave the device at room temperature for at least 1 hour
prior to use. With medicinal products in suspension or particularly viscous,
the information provided according to standard EN13544-1 might be subject
to changes.
Temperature, atmospheric pressure and humidity might affect the appli-
ance's performance.
3.0Vdc with 2 Batteries
AA Alkaline, 1.5Vdc
2.4Vdc with 2 Batteries
AA Rechargeable Ni-MH or Lithium, 1.2Vdc
(1)
(1)
17
1.5W
170 KHz
less than 20 dBA
54(W) X 69(D) X 140(H) mm
125g
140(W) X 80(D) X 150(H) mm
• 0.25 ml
4,00 μm approx
65% approx
8 ml
patient accessories (3,4,5)
min 10°C max 40° C
min 10% max 75% RH
min. 690 hPa max. 1060 hPa
min 10°C max 35°C
min 10% max 75% RH
min. 690 hPa max. 1060 hPa