Publicidad
Idiomas disponibles
Idiomas disponibles
Operation and maintenance
Remove all the packaging of the equipment and loose parts.
Check if the voltage of the appliance corresponds to the main voltage of your home.
Rated voltage : AC220-240V 50Hz
Before use
The steam cleaner (No. 15) can be removed from the frame. Push the switch on the steam
cleaner and lift the unit with the handle from the base, see Figure 2 and 3. In the frame are
several accessories.
Place the steam gun hose (No. 3) in the steam cleaner (No. 15). It requires the valve on the
steam cleaner down to be done, rather than connecting the hose connecting the steam cleaner
so it clicks, see Figure 4. To remove the hose, press the two buttons on the connection of the
hose, and pull the hose back, see Figure 5.
Place one of the three extension tubes (No. 14) in the steam gun hose (No. 3), until it clicks,
see Figure 6. To undo the extension tube, press the button, as shown in Figure 7.
Place multiple extension tubes together according to the desired length.
13
Use of the accessories
UK
Fix the loose connection in the floor brush (No. 13), see step 1 and 2.
Placement of the accessories
Remove the extension tube (No. 14) of the steam gun hose (No. 3) by pressing the button of
the steam gun and extension tubes pulling out. Place the accessory adapter (No. 4) on the
steam gun until it clicks, see Figure 10. The accessory adapter can also be used in conjunction
with extension tubes.
Place brush the floor in the extension tube, see Figure 8.
The floor brush for cleaning floors and walls. For cleaning carpets and
delicate floors and walls, place the cleaning cloth (No. 12) on the
underside of the floor brush, here fore the two clips on top of the floor
brush to be pressed and the two ends of the cleaning cloth under the two
terminals to be fixed, see Figure 9
Place the nozzle (No. 5) on the accessory adapter and
turn it clockwise to secure fit. Place an accessory to
the detail nozzle, see Figure 11.
14
Publicidad
