Publicidad
Idiomas disponibles
Idiomas disponibles
Reverse Osmosis Water Supply
IMPORTANT : The pressure of the water supply
coming out of a reverse osmosis system going to
the water inlet valve of the refrigerator needs to be
between 35 and 120 psi (241 and 827 kPa).
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs to be a
minimum of 40 to 60 psi (276 to 414 kPa.)
If the water pressure to the reverse osmosis system is
less than 40 to 60 psi (276 to 414 kPa):
• Check to see whether the sediment filter in the
reverse osmosis system is blocked. Replace the
filter if necessary.
PARTS AND FEATuRES
Use this page to become more familiar with the parts and features of the refrigerator.
FF Ice-Maker
Dis Door Bins
Slide-Shelf
cap chute
vertical Hinged
Section
Mid Door Bins
vegetable & Fruit
Drawers
Water Filter
Left Door Bins
Tilting Pocket
72_ operating
DA68-02520A(0.1).indb
72
All manuals and user guides at all-guides.com
Interlocking switch
Light
• Allow the storage tank on the reverse osmosis
system to refill after heavy usage.
• If your refrigerator has a water filter, it may
further reduce the water pressure when used
in conjunction with a reverse osmosis system.
Remove the water filter.
If you have questions about your water pressure, call a
licensed, qualified plumber.
Light
Door closer
cover Eva (Light)
Right Door Bins
Tempered glass
shelves
Light
quick-Space Glass
Shelf
cover veg
Light
Light
convertible Room
Auto Pull Out
Drawer
Freezer Drawer Bin
2011.3.25
5:30
Publicidad
