RELEASE OF LIABILITY:
By assembling and inflating this product, you agree that you have read and understand the entire World of
Watersports' product manual, including all instructions and warnings contained in that material prior to using this
product. You additionally agree that you will ensure any additional or subsequent users of this product will read
and understand the entire owner's manual. Misuse or improper use of this product could result in risks, dangers
and hazards which can result in serious injury or death. The risks and dangers that can be encountered through
the improper use of this product can be avoided by reading and following the warning guidelines listed within the
owner's manual and by proper use of this product. Your assembly and use of this product shall be evidence of your
agreement, to the fullest extent permitted by law, to properly follow the instructions and abide by the warnings set
forth within the product manual. Your assembly and use of this product shall also constitute a release, to the extent
permitted by law, by you and by any third party permitted by you to use, in any manner, this product, to World of
Watersports from any and all liability for any loss, damage, injury and/or expense that you or any user of this
product may suffer as a result of the use of this product. This release shall extend to any loss, damage, injury
or expense due to any cause whatsoever, including negligence or breach of contract on the part of World of
Watersports and/or any party participating in the design and/or manufacture of this product. The terms of this
release shall be effective and binding upon you, your heirs, next of kin, executors, administrators, assigns and
representatives. Your assembly and use of this product shall constitute your agreement to assume and accept
any or all known or unknown risks of injury to you and/or to third parties through the use of this product. World of
Watersports and related parties have not made and hereby expressly deny any oral or written representation and/
or warranty, including warranty for a particular purpose, other than what is set forth herein and in the World of
Watersports' owner's manual.
THE BEST AIR PUMPS TO USE TO INFLATE YOUR TUBE ARE THE FOLLOWING:
1. 110V Electric Pump - E.g. WOW Sports 3.0 PSI Mega Max Power Pump or any 2.5 to 3.0 PSI 110V Electric Pump.
2. WOW Sports Double Action Hand Pump or Foot Pump
3. WOW Sports 12V Pump - Note that most 12V pumps have a maximum air pressure of 1.0 PSI so a secondary
air pump, such as the Double Action Hand Pump or a foot pump, will need to be used to reach the necessary
air pressure for your inflatable.
4. Vacuum with two-way switch
1.
2.
ASSEMBLY INSTRUCTIONS:
1. Lay the product out on a flat surface without sharp objects that could puncture the PVC bladder or cover. If
the product has an outer cover make sure the inside PVC bladder is unfolded and the valves are in the correct
position, aligned with the cover valve openings.
2. Locate the Inflation Valve(s) on your towable by finding the round zippered valve cover(s) with WOW logo.
3. Inflate the product to about 50% full. If your product has a cover re-check to make sure it is correctly aligned
with the PVC bladder and valves. If there is more than one chamber in the bladder, inflate the outer chamber first.
After the cover is aligned with the PVC bladder, inflate the chambers to 100% starting with the outer chamber.
4. Inflate the bladder(s) until firm and the cover is wrinkle free and taut (covered items only).
(Please see the PROPER INFLATION section below for proper inflation instruction).
5. After your product is inflated properly close all valves completely. Zip / close valve covers.
2.
3.
2
PROPER INFLATION:
Proper inflation is the key to optimum performance and durability of this product. While in use, the cover should be
taught with few wrinkles. Once inflated you should test whether there is enough air in the tube by having an adult
stand on top of the tube. If the tube is properly inflated, then the adult will barely sink into the tube while standing
on top of it. If the tube is under inflated damage can occur to the tube while it is being towed and the warranty will
be voided. It is important to monitor the amount of air in the product once the item is in use. Continue to make sure
that the tube is properly inflated. When not in use, be sure to remove some air from the tube and put in a shaded
area. If you leave a full tube sitting in the sun it will cause the air inside to expand, causing serious damage to the
seams and I-beams of the tube. Check and adjust inflation levels each time you use the tube.
MAINTENANCE:
• You may clean your towable using soap and water or mild detergent.
• Never use strong cleaning agents.
• The towable, when clean and dry, can be deflated and stored in a cool, dry area out of direct sunlight.
• To deflate, simply unfasten the entire valve from the base.
• Avoid storing this product in areas of extreme temperatures and please take precautions against animals
and rodents.
• Bright colored fabric covers used on the towable may bleed or fade when initially wet. Protect all boat interiors
and all other surfaces from possible staining.
PRODUCT STORAGE:
To prepare the product for storage please make sure that it is completely dry to prevent mildew and rot. If the
product was used in salt water make sure to rinse the item first with fresh water and then allow it to dry completely.
Release all of the air from the chamber(s) and fold the product. If possible please store these products in a
controlled temperature and do not expose the product to temperatures less than 40 degrees F. Cold temperature
will damage the PVC material and cause it to crack at the folds.
TOW CONNECTION SET-UP:
TOW SYSTEM
If your WOW Towable Product has the
1.
Put the top tow strap down
Note to pull tautly on the tow strap.
through the bottom loop strap
that is sewn to the bottom of the
product.
IF YOUR WOW PRODUCT HAS MULTIPLE TOW POINTS READ BELOW:
Some wow products with multiple tow points feature a store and secure tow point strap with clip. This feature
allows you to secure your unused tow point so it does not drag in the water while you are using the other tow point.
WOW recommends you always use this feature to reduce drag, splashing, and to create a smoother ride. DO NOT
TOW FROM THE STORE AND SECURE TOW POINT STRAP WITH CLIP. DO NOT TOW FROM MULTIPLE TOW
POINTS AT THE SAME TIME.
STORE AND SECURE TOW POINT STRAP WITH CLIP this
feature allows you to secure your unused tow point so it does
not drag in the water while you are using the other tow point.
illustrated below please follow diagram for proper setup:
2.
Now your ready to hook up your
tow rope.
3
3.