Descargar Imprimir esta página

Garland ULTIMATE 517 LE Manual De Instrucciones página 26

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
English
5. START UP INSTRUCTIONS
5.1. LIST OF MATERIALS
This machine includes the following elements that you
will find included in the box:
• High pressure machine
• Handle with cable winder
• Rotating lance
• Standard lance
• Gun
• High pressure hose
• Wire for lance cleaning
• Electric cable support
• Lance support
• Hose joint
• Instruction manual
5.2. MOUNTING THE MACHINE
1. Mount the cable winder and
the handle.
Insert the handle and the cable
winder to the main body of the
machine.
Place the screws and secure
tightly.
2. Mount the winder
Place the electric support on the
side of the machine where the
electric cable is by inserting and
pushing downwards.
3. Mount the electric cable
support.
Place the electric support on the side of the machine
where the electric cable is by inserting and pushing
downwards.
is in place (5a) before mounting the hose joint. This
filter is vital to avoid the entry of impurities that could
damage the pump of the machine.
mains.
5.3. VERIFICATION POINTS PRIOR TO USE
The current supply and its related tension must be
those stipulated on the characteristics label.
Check the machine and look for lose pieces
(screws, nuts, covers etc) and for any
26/96
4. Lance support.
Place the lance support on the
opposite side to that of the cable
support by inserting and pushing
downwards.
5. Mount the hose joint.
Make sure that the filter
6. Connect the water entry hose
using a quick connector.
7. Connect the high pressure
hose.
8. Connect the gun to the other
high pressure terminal.
9. Connect the lance to the gun
and rotate 90º.
10. Connect the cable to the

Publicidad

loading

Este manual también es adecuado para:

Ultimate 315 e