Graco AquaMax 3050E Instrucciones página 11

4 Control / Operation
Connecting the spray lance to
the spray gun
Switching on the cleaner when
it is connected to a water
supply
Switching on the cleaner when
it is connected to open tanks
(suction mode)
Options / model variants
1)
Original instructions
All manuals and user guides at all-guides.com
A
B
Always remove any dirt from the nipple before connecting the spray
lance to the spray gun.
O
Operate the spray gun several times at short intervals to vent the sys-
tem.
1. Pull the blue quick-release
grip (A) of the spray gun
backwards.
2. Insert the nipple of the spray
lance (B) into the quick-re-
lease connection and release
it (C).
3. Pull the spray lance (or other
C
accessory) forwards to check
that it is securely attached to
the spray gun.
CAUTION
1. Main switch
Turn the switch to position „ I „.
2. Unlock the spray gun and
operate it.
3. Lock the spray gun even dur-
ing short pauses.
CAUTION
1. Before connecting the suction
hose to the cleaner, fill the
hose with water.
2. Main switch. Turn the switch
to position „ I „.
3. Unlock the spray gun and
operate it.
Max. suction height (primed) =
1m.
English
11