Publicidad
Idiomas disponibles
Idiomas disponibles
Winch Installation
Correct installation of your Winch is required for proper operation. Installation should be on a flat surface
following the bolt pattern shown in FIGURE 1.
Read and follow directions carefully to ensure proper Winch alignment and trouble free operation.
This Winch MUST be mounted with the synthetic rope in the under-wind direction (FIGURE 8).
MUST use only genuine Keeper Winch replacement Rope.
!
!
WARNING
Improper mounting could damage your Winch and void your warranty.
!
!
WARNING
DO NOT EXCEED THE RATING OF YOUR RECIEVER HITCH
Your Keeper Winch Synthetic Rope comes ready
for installation. Please follow these steps for a
simple installation.
Please note that Synthetic Winch Rope (SWR) is very
senstive to abrasion. Therefore, please check the
winch drum, inboard drum flanges and aluminum
hawse (it is recommended that you use an Aluminum
Hawse instead of a roller fairlead) for any sign of burrs,
nicks or any damage that may harm the SWR. Please
sand smooth over any imperfections that you might
find before installing the SWR.
A. Please mount the winch and aluminum hawse to
the optional base plate (KWA14622) or other winch
rated plate or mounting kit.
5
Mounting Plate
Aluminum Hawse
Fairlead
THIS PRODUCT IS NOT INTENDED FOR LIFTING / HOISTING
FIGURE 10
Synthetic Rope
Under-wind
Direction
*DOES NOT INCLUDE MOUNTING PLATE
Publicidad
