Philips 29PT8609/12 Manual página 7

Manual store
This menu is used to store the programmes
one at a time.
H
& Press the
key.
é With the cursor, select the
:
Manual store
Main •
Install •
Language •
Country •
Auto Store •
Manuel Store
Sort •
Program •
Name •
"
select (automatic detection*)
System: Europe
or (BG standard),
Western Europe
(DK standard),
Europe United Kingdom
(I standard) or (LL' standard).
France
* Except for France (LL' standard), you must select
Favourite programmes
This menu allows you to select the programmes
to be accessed with the
H
& Press the
key.
é With the cursor, select the
and press ≥.
Favourite Progr.
Main •
Install •
Language •
Country •
Auto Store •
Manuel Store •
Sort •
Favourite Progr.
Name •
Other settings in the Install menu
H
& Press the
key and select the
é
to change the display language for
Language :
the menus.
"
to select your country (
Country :
Great Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your
country does not appear in the list, select ". . . "
'
: to start automatic search for all
Auto Store
programmes available in your region. If the
transmitter or cable network sends the
'
menu then
Install
(
System •
Search •
Program No. •
§
Fine Tune •
Store •
è
! Repeat steps ' to è for each programme to
Eastern
ç To quit the menus, press
@ #
P key.
menu then
Install
" Use the up/down cursor to select the
' Use the left/right cursor to add or remove a
( Run through steps " and ' for each
2 •
§ To exit, press
menu:
Install
for
GB
( To quit the menus, press
choice .
France
press ≥.The search starts. Once a
Search :
programme is found, the scanning stops and its
name is displayed (when available). Go to the
next step. If you know the frequency of the
required programme, this can be entered
0 9
directly using the to
If no picture is found, consult the possible solutions (p. 12).
enter the required number with
Program No. :
0 9
the ≤≥ or
to keys. Example : program
01
1, enter .
if the reception is not satisfactory,
Fine Tune :
adjust using the ≤≥ cursor.
press ≥.The program is stored.
Store :
store.
d
The list of favourite programmes is displayed.
The programmes that were stored at
installation will automatically appear on this
list.
required programme.
programme from the list.
programme to be added or removed from the
list.
d
several times.
automatic sort signal, the programmes will be
numbered correctly. If this is not the case, you
need to use the Sort menu to renumber the
programmes (see p. 4).
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.).
In this case, indicate your choice using the <>
cursor and validate with ≥.To quit or interrupt the
H
search, press . If no picture is found, consult the
possible solutions (p. 12).
d
keys.
.
.
5