Philips 29PT8609/12 Manual página 8

Picture settings
H
& Press then ≥ cursor.The
displayed :
Main •
Picture
Sound •
Features •
Install •
é Use the <> cursor to select a setting and the
≤≥ cursor to adjust.
Note : during the picture adjustment, only the
selected line remains displayed. Press <> to
display the menu again.
Description of the adjustments :
this changes picture brilliance.
• Brightness :
Sound adjustments
H
& Press , select Sound (>) and press ≥.The
menu is displayed :
Sound
Main •
Picture •
Sound
Features •
Install •
é Use the <> cursor to select a setting and the
≤≥ cursor to adjust.
Description of the settings :
• this alters the high frequency sounds.
Treble :
• this alters the low frequency sounds.
Bass :
Feature settings
H
& Press
, select
Features
You can adjust :
é
, and
Timer Child Lock Parental Cont
see next page
"
,
Dynamic NR: Min Med
or attenuates picture noise (snow)
Max Off :
in difficult reception conditions.
'
(only available on very large screen
Rotation
sets) : large screen sets are sensitive to
6
menu is
Picture
Brightness •
Colour •
Contrast •
Sharpness •
Colour Temp. •
Digital Options •
Store •
" Once the adjustments have been made, select
Treble •
Bass •
Balance •
Delta Volume •
AVL •
HP Volume •
Store •
" Once the adjustments have been made, select
' To quit the menus, press
(>) and press ≥.
. :
(
(optimum position),
§ To quit the menus, press
this changes the intensity of the colour.
• Colour :
this changes the difference
• Contrast :
between the light and dark tones.
this changes the picture definition.
• Sharpness :
this changes the colour
• Colour Temp.:
rendering: (bluer),
Cold Normal
or (redder).
Warm
•
Digital Options :
- 100 Hz processing.
100 Hz :
-
Digital Scan (according to the version)
line flicker which is visible on some pictures.
- doubling of vertical resolution
Double lines :
which removes visible picture lines.
Advised for NTSC (60Hz) pictures.
and press ≥ to store them.
Store
d
Press to exit.
• this balances the sound on the left
Balance :
and right speakers.
• this is used to compensate
Delta Volume :
any volume discrepancies between the
different programs or EXT sockets.
This setting is available for programs 0 to 40
and the EXT sockets.
• (Automatic Volume Leveller) : this is
AVL
used to limit increases in sound, especially on
program change or advertising slots.
• allows you to adjust the
HP Volume :
headphones volume independently from the
loud-speakers on the TV set.
Store and press ≥ to store these changes.
d
terrestrial magnetic field variations.
This setting is used to compensate for this by
adjusting the picture rotation.
Dynamic Contrast (according to the version) :
, (optimum position),
Min Med
Enhances the contrast of details in lighter,
average and darker areas.
d
(balanced)
reduces
:
.
or .
Max Off
.