Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY WARNINGS & INSTRUCTIONS
Information contained in this Instruction Manual will help you operate the item safely,
protect yourself and others from hazards, and prevent damage to the device and other
property.
SAVE THESE INSTRUCTIONS
WARNING!
-
This is not a TOY. Children should be kept out of reach from this pool
vacuum and its accessories.
-
Never allow children to operate this pool vacuum.
-
This appliance is not intended for use by persons with reduced physical,
sensory, mental capabilities, or a lack of experience and knowledge,
unless they are given supervision or instructions concerning the safe
use of the appliance and understand the hazards involved by a person
responsible for their safety.
-
Children must not play with this product.
-
Cleaning and maintenance of the pool vacuum must not be carried out
by children.
-
Make sure the pool vacuum is fully immersed in the pool before initiating
operation. The minimum water level required to operate the pool
vacuum must reach above the power ON/OFF switch of the pool
vacuum when it is held in a vertical position. Operating the pool vacuum
when it is not immersed correctly could damage the unit and void the
warranty.
-
Maximum operating depth in water is 3 meters (9.8ft).
-
Maximum water temperature: 5˚C (41˚F) –35˚C (95˚F)
Detachable supply unit (external adaptor).
-
-
The pool vacuum should only be recharged with the external adaptor
and charging base delivered with this product.
-
For the purposes of recharging the battery, only use the detachable
supply unit (external adaptor model number: DSS12D-1261000-B /
DSS12D-1261000-C / DSS12D-1261000-D/ LX135100U) that provided
with this pool vacuum to charge the battery.
-
Connect the external adaptor to a power source through a residential
current device (RCD) / a ground fault circuit interrupter (GFCI). If in
doubt, consult a qualified electrician.
-
Do NOT use this pool vacuum if any damage is detected.
-
Replace damaged parts with ones that are certified by the distributor or
manufacturer.
-
Turn off the power, disconnect the external adaptor from the power
source, and unplug the external adaptor from the charging base before
detaching the pool vacuum from the charging base.
-
Disconnect the pool vacuum from the supply mains and make sure the
pool vacuum is OFF prior to carrying out regular maintenance – such as
cleaning the filter and the charging contact plates.
-
DO NOT attempt to replace the installed rechargeable Li-ion battery
1/175
Publicidad
