HQ-Power VDPLP2403RGBA Manual Del Usuario página 7

Idiomas disponibles

6. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.

2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)

should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not

change the location of the connections.

3. Moving mechanic parts must not show any signs of wear and tear.

4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.

5. Disconnect the device from the mains prior to maintenance activities.

6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

7. There are no user-serviceable parts apart from the fuse.

8. Contact your dealer for spare parts if necessary.

7. Technical Specifications

Power Supply

Power Consumption

Connection

Fuse

Beam Angle

LEDs

Dimensions

Total Weight

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of

damage or injury resulted from (incorrect) use of this device. For more info concerning this product, please

visit our website www.hqpower.com. The information in this manual is subject to change without prior

notice.

This manual is copyrighted. The copyright to this manual is owned by Velleman Components nv. All worldwide

rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium

or otherwise without the prior written consent of the copyright holder.

VDPLP2403RGBA_v3

max. 230VAC / 50Hz

max. 65W

3-pin XLR

3.15A, 250VAC (5 x 20mm) (order code FF3N)

30°

18 x 3W (red: 6 pcs, green: 6 pcs, blue: 6 pcs) + 6 x 1W (amber)

220 x 220 x 340mm

3.4kg

HQPOWER