Publicidad
Idiomas disponibles
Idiomas disponibles
Installing and Removing Flat Panel Display
Hook display onto wall plate (A) fi gure 4.1. Tighten
4
M5 x 12 mm screws (C), shown in fi gure 4.2 and
detail 2.
Note: For security models, use 4 mm security allen
wrench (I) to tighten M5 x 12 mm screws (C).
To remove display from mount, loosen screws (C)
and lift display off of mount.
WARNING
• Do not lift more weight than you can handle.
Use additional man power or mechanical lifting
equipment to safely handle placement of the display.
• Failure to lock hook bracket with screws (C) can
cause display to come off mount if hit accidentally.
CAUTION
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 20 in. • lb (2.26 N.M.) maximum torque.
fi g. 4.2
B
A
C
7 of 26
fi g. 4.1
DISPLAY
B
DETAIL 2
ISSUED: 09-19-11 SHEET #: 203-9040-1
A
A
C
Publicidad
