Publicidad
Idiomas disponibles
Idiomas disponibles
For assistance with your product, visit our website at for a list of service centers, or call BLACK+DECKER at 1-800-544-6986.
PROBlEM
Unit will not start.
Dust is not being collected.
TROUBLESHOOTING GUIDE
BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
CAUsE
Cord not plugged in.
Circuit fuse is blown.
Circuit breaker is tripped.
Cord or switch is damaged.
Sandpaper holes do not align.
Dust canister is full.
CORRECTiOn
Plug tool into a working outlet.
Replace circuit fuse. (If the product repeatedly causes the circuit fuse to
blow, discontinue use immediately and have it serviced at an authorized
service center.)
Reset circuit breaker. (If the product repeatedly causes the circuit fuse to
blow, discontinue use immediately and have it serviced at an authorized
service center.)
Have cord or switch replaced at an authorized service center.
Use sandpaper with the appropriate hole configuration.
Separate dust canister and gently shake or tap to empty.
English
7
Publicidad
