About the Operating Instructions
The product is featured with s a series of important integrated functions to guarantee high-standard
reception and operation. All the designs aim at the possibility of easy operation. However, many of the
functions need to be explained. For the purpose, the
Operating Instructions will enable you to be favored by the following significant features and share the
best audio effect as much as possible. Before using the car, we advise you to have some acquaintance
with the functions and operations through the Operating Instructions. In the Operating Instructions, all the
basic operations are summarized, including some simple operations.
Major Features
Ability to play any USB disk, SD card/ MP3 files in MMC cards,Automatic memory function for 18 FM
stations/ LED display/stereo control/ mute control/ (fullelectronic volume/ menu control)/equal-loudness
compensation AUX IN/clock, function (24-hour system).
Attentions
• Any operation affecting your safe drive cannot be made but after parking safely.
• No working in the extremely high-temperature or low-temperature environment, e.g. the starting tempe-
rature in the car is in the extent from -10 to 55.
• To avoid any short circuit or other accidents, do not fall any metal (screw, coin or tools) into the device.
• Do not touch the automatic antenna with an earthing conductor for the avoidance of any short circuit.
12
• Because of the momentary high voltage caused by startup of the car, please turn on the player after the
full startup of the car and turn off it if the car is to be stopped.
• While playing USB, please avoid any collision to break the player and withdraw the USB if stop playing.
• While inserting any USB or SD card, please avoid any hair or impurity entering the cassette of USB or
SD card.
Function & Operation
1.SEL buttons(Big rotating knob) are volume control and menu buttons (+) (-) Bass/Tred/ Bal/ Fad/ EQ
a) Click the big rotating round SEL button to start up the following circular selection modes of electronic
audio: -> Bass (BASS) -> Treble (TRED);
b) Balance of left/right loudspeakers (BAL) -> Balance of front/rear loudspeakers (FAD) ->Eq During
any mode, the standby time surpasses 5 seconds, the system will return to the former functional mode
automatically.
Volume Control
1. When the audio mode is set in the default of volume control mode, revolve SEL button clockwise/
anticlockwise to adjust the volume at will by your requirement;
2. When the audio mode is not set in the default of volume control mode, you can press SEL button repea-
tedly until the LED displays "VOL"; then revolve rotating volume button SEL. In this way, you can adjust the
volume according to your requirement.
www.multilaser.com.br