Nebula Mars II Instrucciones De Seguridad página 6

1 1
• Power on / off / switch to standby
2
• Press to enter / exit mouse key mode.
3
• Press to confirm a selection or entry
• Pause / resume during play
4
• Press to access the home menu
5
• Access more options during play (availability of
options are dependent on the source input).
• Press and hold to adjust focus
Navigation buttons
6
• Navigate menus or adjust the selected contents
7
• Return to a previous menu
8
• Volume down / up
08
Getting Started
Placement
1.
Place Mars II on a stable, flat foundation in front of the
projection surface. For the best results, the projection
surface should be white and flat. The distance between the
projector and the projection surface must be a minimum
of 1 meter (39.4 inches) and a maximum of 3 meters (118
inches).
• It is unnecessary to tilt the projector towards the
T
projection surface. You can correct the projection
image with the built-in keystone correction.
• The distance between the projector and the
projection surface determines the image size.
Prepare the Remote Control
2.
① For first time use, remove the plastic battery insulation
tab to activate the remote control batteries.
② To replace the batteries, slide off the battery
compartment backplate to open the battery compartment,
insert new batteries (matching the polarity (+/-) indicated),
and close the battery compartment.
09