ENGLISH
32
1
Remove the screw in the backpanel with a
screwdriver. Then remove the back panel.
2
Bend the hooks aside and remove the power
unit.
3
Break the snap hooks and remove the front
panel of the power unit.
4
Take out the battery holder and cut the
battery tags with a pair of cutting pliers.
Guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate
worldwide guarantee lealet.
Guarantee restrictions
The shaving heads (cutters and guards) are not
covered by the terms of the international guarantee
because they are subject to wear.