Publicidad
Idiomas disponibles
Idiomas disponibles
Replacingthesystemouterfoilandtheinnerblades
system outer foil
inner blades
Replacingthesystemouterfoil
1. Press the foil frame release buttons and lift
the outer foil section upwards.
. Press the system outer foil release buttons
and pull down the system outer foil.
3. Align the foil frame mark (
system outer foil mark ( ) and securely
attach together.
•
The system outer foil cannot be reversely
attached.
•
Always insert the system outer foil to the
foil frame when attaching to the shaver.
4. After turning the foil frame mark (
front, securely attach the outer foil section to
the shaver until it clicks.
Replacingtheinnerblades
1. Press the foil frame release buttons and lift
the outer foil section upwards.
. Remove the inner blades one at a time.
•
Do not touch the edges (metal parts) of
the inner blades to prevent injury to your
hand.
3. Insert the inner blades one at a time until
they click.
ES-LF51_US.indb
7
once every year
once every two years
) and the
) to the
Replacementparts
Replacement parts are available at your dealer or Service Center.
System outer foil and inner
blades
Replacement parts for
ES‑LF51
System outer foil
Inner blades
Removingthebuilt‑inrechargeablebattery
ATTENTION:
A lithium ion battery that is recyclable powers the product you
have purchased. Please call 1‑800‑8‑BATTERY for information
on how to recycle this battery.
Remove the built‑in rechargeable battery before disposing of the
shaver. Do not dismantle or replace the battery so that you can
use the shaver again. This could cause fire or an electric shock.
Please contact an authorised service center.
The battery replacing service is available only in the United States
of America.
•
Disconnect the power cord from the shaver when removing the
battery.
WES907
WES9167
WES9068
7
2011/04/26
10:52:01
Publicidad
