Kohler K-452 Guia De Instalacion página 3

Faucet Body
Plate
Apply Plumbers
Putty.
Dished Washer
1. Faucet Installation
Clean the lavatory surface to remove any grease, oil or debris.
Models with Plate: Apply plumbers putty or other sealant
around the underside edge of the plate. Position the plate over
the lavatory holes.
Apply a ring of plumbers putty or other sealant around the
underside edge of the faucet body according to the putty
manufacturer's instructions.
Insert the faucet through the lavatory holes.
Slide a dished washer onto each shank with the flat edge up
towards the lavatory.
Thread the locknuts onto the supply shanks and hand-tighten.
Kohler Co.
Faucet Body
Apply Plumbers
Putty.
Dished Washer
Locknut
3
Locknut
1031180-2-A