Pioneer DEH-P4600MP Manual Del Usuario página 38

Section
10 Other Functions
Introduction of XM operation
You can use this unit to control a XM satellite di-
gital tuner (GEX-P910XM), which is sold
separately.
For details concerning operation, refer to the
XM tuners operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuners operation manual.
1 XM tuner information
Shows the XM tuner information which has
been selected.
2 XM channel number indicator
Shows to which XM channel number the
tuner is tuned.
! If a channel number 100 to 199 is se-
lected, d on the left of the XM channel
number indicator will light.
! If a channel number 200 or more is se-
lected, d on the left of the XM channel
number indicator will blink.
XM operation
XM operation of the following function with
this unit differs.
! Swiching the XM channel select setting
(Refer to this page.)
38
En
Swiching the XM channel select
setting
You can switch if you select a channel with a
channel number or from a channel category
when you select a channel.
1 Press PAUSE to select channel select set-
ting.
2 Each press of PAUSE changes the chan-
nel select mode in the following order:
CHNUMBER (channel number select setting)
CATEGORY (channel category select
setting)