Vestfrost VLS 026 SDD Instrucciones Para El Uso página 9

Control panel
ON/OFF Switch
(circuit breaker)
The green diode indicates that there is power and the compressor is operating.
Solar panels
Placing
Solar panels are always to be placed on a
stable roof or bar, which is safe and easily
accessible (not for the public).
The solar panels are always to be fitted
according to the supplier's instructions and
with the screws and fittings included or
recommended by the manufacturer.
Do not place the solar panels in the
shadows of buildings, trees, etc. The
surfaces of the solar panels are to be
turned directly towards the sun.
Specifications
The specifications which the solar panels
are to observed are available in table 2.
Type :
Nominal voltage:
Nominal power:
Number of parallel
connected modules
per array:
Warranty:
Performance guar-
antee:
Certificates:
Table 2
9
GB
Solar-thermometer
Green diode
fig. 8
Type 2 according E003/
PV01 direkt drive
18V
2 x 360W (standard test
conditions)
2 parallel arrays
4 parallel modules pr
array
Min. 2 years
25 years (to 80% of
original value)
UL, TÜV or compliance
with the requirements of
IEC 61215