Publicidad
Idiomas disponibles
Idiomas disponibles
TL 07160 BL/IN/MA
CLEANING AND MAINTENANCE
Disassembly and cleaning of aluminium filters.
Follow this guide correctly to clean the filters.
-
Press the filter lock button and pull down.
-
Soak the filter in water, add detergent and leave it for 2-3 minutes. After cleaning with a brush, do
-
not apply too much pressure, the filter is delicate and could easily be damaged.
You can also wash the filters in the dishwasher at 60ºC.
-
The filter is made of aluminium so it is advisable not to use aggressive cleaners that can corrode it.
-
Make sure the hood if off when cleaning.
-
Regular cleaning
Clean the aluminium filters weekly. This will prevent the risk of fire. As the filter collects grease,
-
smoke and dust, it affects the efficiency of the hood. If the filters are not cleaned the grease can clog
them.
Cleaning the hood
To protect the hood body from corrosion, you should clean the outside of the hood with hot water
-
and non-abrasive detergent every month. To do this, moisten a cloth with that water and clean the
hood.
Take care not to wet the engine and other interior parts, this could damage the hood.
-
Changing the bulb
1. Turn off and unplug the hood.
2. Wait until the bulb has cooled before changing it.
3. Use the same type of bulb, LED 2W.
4. The bulb change should be performed by a qualified technician.
13
Publicidad
