Switching The Rear Speaker Output; Boosting The Bass; Selecting The Listening Position; Adjusting The Speaker Output Levels Finely - Pioneer AVH-X7700BT Manual De Instrucciones

Radio av rds con dvd
Ocultar thumbs Ver también para AVH-X7700BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Audio adjustments
4 Drag the graph lines to the position you want to
adjust.
p The following items can also be set.
:
Switches the subwoofer phase between normal and reverse
position.
LPF/HPF:
Switches the LPF/HPF setting to "On" or "Off".
 This function is not available when adjusting the
High speaker.
 Touch
or
to switch the adjusting speaker.
Switching the rear speaker
output
1 Turn the source off.
2 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 37
3 Touch [Rear Speaker Output].
4 Touch to switch "Rear" (default) or
"Subwoofer".

Boosting the bass

1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 37
2 Touch [BASS Boost].
3 Touch to select the bass boost level from 0 to
+6.

Selecting the listening position

You can select a listening position that you want to make as the
center of sound effects.
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 37
2 Touch [Listening Position].
3 Touch the desired position to change the lis-
tening position.
The following items are available:
Off (default), Front, Front Left, Front Right, All.
38
p "All" is not available when "Network Mode" is selected as
the speaker mode.
Adjusting the speaker output
levels finely
Fine adjustments of the speaker output level can be made by
listening to audio output.
p This function is available when "Subwoofer" is set to "On".
 Using the subwoofer output on page 37
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 37
2 Touch [Speaker Level].
3 Touch
or
to select the listening position
if necessary.
The following items are available:
Off (default), Front, Front Left, Front Right, All.
p "All" is not available when "Network Mode" is selected as
the speaker mode.
p If you change the listening position setting, the output
levels of all the speakers will change in conjunction with the
setting.
4 Touch
or
to adjust the speaker output
level.
p "–24" dB to "10" dB is displayed as the distance to be cor-
rected is increased or decreased.
The following speakers are available:
Standard Mode: Front Left, Front Right, Rear Left, Rear Right,
Subwoofer
Network Mode: High Left, High Right, Mid Left, Mid Right,
Subwoofer
 To use this function, the vehicle's acoustics must
be measured in advance.

Adjusting the time alignment

By adjusting the distance from each speaker to the listening
position, time alignment is able to correct the time required for
sound to reach the listening position.
1 Measure the distance between the head of the
listener and each speaker unit.
2 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 37
3 Touch [Time Alignment].
4 Touch
or
to select the listening position
if necessary.
The following items are available:
Off (default), Front, Front Left, Front Right, All.
p "All" is not available when "Network Mode" is selected as
the speaker mode.
p If you change the listening position setting, the output
levels of all the speakers will change in conjunction with the
setting.
5 Touch
or
to input the distance between
the selected speaker and the listening position.
p You can input the value between 0 and 140 inch.
The following speakers are available:
Standard Mode: Front Left, Front Right, Rear Left, Rear Right,
Subwoofer
Network Mode: High Left, High Right, Mid Left, Mid Right,
Subwoofer
 If you touch [TA On], the time alignment is turned
off mandatorily.
 This function is available only when the listening
position setting is set to "Front Left" or "Front
Right".
 To use this function, the vehicle's acoustics must
be measured in advance.
Switching the time alignment
preset
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 37
2 Touch [Time Alignment Preset].
3 Touch the item.
Initial (default):
Sets to the initial setting value.
ATA:
Reflects the result of "A-EQ&TA Measurement" to the
setting value.
Off:
Resets all setting values to 0.
Custom:
Sets to the value adjusted at "Time Alignment".
p When you adjust the time alignment, the preset item will
switch automatically to "Custom".
p "Custom" can be selected only when the listening position is
set to "Front Left" or "Front Right".

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Avh-x6700dvd

Tabla de contenido