Setting The Time And Date; Storing Song Information To An Ipod (Itunes Tagging); Setting The "Sound Retriever" Function; Changing The Wide Screen Mode - Pioneer AVH-X7700BT Manual De Instrucciones

Common operations
 Changing the wide screen mode on page 45

Setting the time and date

1 Touch the current time on the screen.
2 Touch or to set the correct time and
date.
You can operate the following items: Year, month, date, hour,
minute.
p You can change the time display format to "12hour" (default)
or "24hour".
p You can change the order of date display format: Day-month-
year, Month-day-year, Year-month-date.
Storing song information to an
iPod (iTunes Tagging)
You can store song information to the iPod when this product
receives song information. The songs will appear in a playlist
called "Tagged playlist" in iTunes the next time you synchronize
your iPod. You can directly buy the songs via this product.
p The iTunes Tagging function is available while digital broad-
casts are being received.
p This function is available for the following iPod models:
iPhone, 3G, 3GS, 4, 4s, 5, 5s, 5c
iPod touch 1st, 2nd, 3rd, 4th, 5th generation
iPod classic 1st, 2nd generation
iPod nano 3rd, 4th, 5th, 6th generation
p The version of iTunes must be 7.4 or higher.
1 Tune into the radio station.
 Radio on page 19
2 Touch the song title or artist name.
The information on the song on air is stored in this product.
When the information is acquired, turns off and
displayed.
p The song information for up to 50 songs can be stored in this
product.
3 Connect your iPod.
The song information is transferred to your iPod.
p When your iPod is already connected, the song information
will be transferred directly to your iPod every time you touch
the song information.
p When the song information transfer is completed, the infor-
mation stored in this product will be automatically deleted.
 If you turn off this product or disconnect the iPod
while transferring song information, the transfer
may not successfully complete.
 While this product is storing song information,
transfer to an iPod is not possible.
Setting the "Sound Retriever"
function
The "Sound Retriever" function automatically enhances com-
pressed audio and restores rich sound.
●
Touch to switch the settings.
●
(Mode1) (default),
"Sound Retriever" function.
●
(Off): Deactivates the "Sound Retriever" function.
p Mode1 has a stronger effect than Mode2.
Changing the wide screen
mode
You can set the screen size for the video and JPEG images.
p The default setting is "Full", and for JPEG images is
"Normal".
1 Touch the screen display mode key.
p The appearance of this key changes according to the current
setting.
2 Touch the desired mode.
●
Full
A 4:3 picture is enlarged in the horizontal direction only,
enabling you to enjoy an image without any omissions.
p This setting is for video only.
●
Zoom
A 4:3 picture is enlarged in the same proportion both verti-
is
cally and horizontally.
p This setting is for video only.
●
Normal
A 4:3 picture is displayed normally, without changing its
proportion.
p This setting is for video and JPEG images.
●
Trimming
An image is displayed across the entire screen with the
horizontal-to-vertical ratio left as is. If the screen ratio differs
from the image, the image may be displayed partly cut off
either at the top/bottom or sides.
p This setting is for JPEG images only.
p You cannot operate this function while driving.
p Different settings can be stored for each video source.
p When a video is viewed in a wide screen mode that does not
match its original aspect ratio, it may appear different.
p The video image will appear coarser when viewed in "Zoom"
mode.
(Mode2): Activates the
45