Publicidad
Idiomas disponibles
Idiomas disponibles
Section
04
Tuner
Listening to the radio
1
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1 Band indicator
Shows which band the radio is tuned to, AM
or FM.
2 Frequency indicator
Shows the frequency to which the tuner is
tuned.
3 Preset number indicator
Shows which preset has been selected.
4 Stereo (5) indicator
Shows when the selected frequency is
being broadcast in stereo.
1
Press SOURCE to select the tuner.
Press SOURCE until you see TUNER dis-
played.
2
Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3
Press BAND to select a band.
Press BAND until the desired band (F1, F2, F3
for FM or AM) is displayed.
12
En
All manuals and user guides at all-guides.com
2
4
3
4
To perform manual tuning, briefly press
c or d.
The frequencies move up or down step by
step.
5
To perform seek tuning, press and hold
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
c or d.
# If you press and hold c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Note
When the frequency selected is being broadcast
in stereo the stereo (5) indicator will light.
Publicidad
