Publicidad
Idiomas disponibles
Idiomas disponibles
Unscrew the height-adjustable feet until the mark on
̈
the base has reached the indicated guide dimension
1
(1
/
" / 32 mm).
4
It is very important to comply with this dimension for
the subsequent alignment of the furniture fronts.
Align the furniture fronts with the spirit level.
̈
Before attaching the appliance in the cavity, check
̈
– that the top and sides of the frame are situated on
the cavity front,
– that the finger guard functions by opening and
closing the two refrigerator compartment doors
several times.
18
All manuals and user guides at all-guides.com
NOTE
12. Attaching the appliance in the cavity
Open one door of the refrigerator compartment.
̈
Pull finger guard all the way out of the gap between the
̈
appliance and cavity wall.
Screw the frame to the cavity wall through the gap
̈
between the door and carcass (3 screws).
Under the freezer compartment drawer screw the frame
̈
to the cavity wall (1 screw).
Open the other door of the refrigerator compartment
̈
and pull out the finger guard. Screw frame to the cavity
wall (4 screws).
Push the finger guard through the frame recess into the
̈
gap between the appliance and cavity wall
Publicidad
