Publicidad
Idiomas disponibles
Idiomas disponibles
Auto changeover
This feature is used in climates where
both air conditioning and heating are
used on the same day.
MCR33893
When the system is set to Auto,
the thermostat automatically
selects heating or cooling
depending on the indoor temperature.
Heat and cool settings must be at least
3 degrees apart. The thermostat will
automatically adjust settings to maintain
this 3-degree separation.
Note:
System setting function 12 controls
Auto changeover. See "Manual/Auto
Changeover" on page 51.
47
69-2803ES—05
Publicidad
