Preparing For Use - Thetford CASSETTE C2 Manual De Instrucciones

GB
Instructions for use
These operating instructions cover Thetford cassette toilet models C2,
C3 and C4. There are a few differences in the use of these models.
Make sure that you follow the instructions that apply to your toilet
model.
The parts and functions that are referred to by letters are illustrated on
the fold-out at the back of these operating instructions.
The actions to be taken, referred to by numbers, are illustrated on the
fold-out at the front of these operating instructions.
C2 PARTS AND FUNCTIONS
a. Flush knob: opens and shuts the valve blade and pumps water
into the bowl using an electric pump.
b. Removable seat and cover
c. Toilet paper storage compartment: keeps the paper dry and clean.
d. Wall mounting for toilet roll.
e. Waste tank level indicator: indicates when the waste tank is full.
f. Leakage tray: catches drops of flush water when the waste tank
has been removed.
g. Storage compartment for toilet fluids (only the tall model).
h. Safety catch: holds the waste tank in place.
i. Drain pipe: also waste level indicator for the flush water tank.
j. Water filling funnel: turns outwards for easy filling of the water tank.
k. Cover: guarantees optimal hygiene. Opens when the waste tank is
inserted into the toilet and closes when the waste tank is removed.
l. Valve blade opener.
m. Valve blade / valve seal.
n. Vent plunger: for emptying without splashing.
o. Upper handle: for easy carrying and emptying.
p. Automatic pressure release vent: ventilates the waste tank when it
is inserted into the cassette toilet. Avoids excessive pressure build
up in the waste tank.
q. Handle.
r. Rotating emptying spout: ensures that the waste tank can be
easily and hygienically emptied.
s. Access door to waste tank and water filling funnel: lockable from
the outside of the vehicle.
C3 PARTS AND FUNCTIONS
a. Flush knob: opens the valve and operates your vehicle's electric
pump.
b. Removable seat and cover
c. Toilet paper storage compartment: keeps the paper dry and clean.
d. Wall mounting for toilet roll.
e. Waste tank level indicator: indicates when the waste tank is full.
f. Leakage tray: catches drops of flush water when the waste tank
has been removed.
g. Storage compartment for toilet fluids (only the tall model).
h. Safety catch: holds the waste tank in place.
i. Valve blade opener.
j. Cover: guarantees optimal hygiene. Opens when the waste tank is
inserted into the toilet.
k. Valve blade / valve seal.
l. Vent plunger: for emptying without splashing.
m. Automatic pressure release vent: ventilates the waste tank when it
is inserted in the cassette toilet. Avoids excessive pressure build
up in the waste tank.
n. Upper handle: for easy carrying and emptying.
o. Handle.
p. Rotating emptying spout: ensures that the waste tank can be
easily and hygienically emptied.
q. Access door to waste tank and water filling funnel: lockable from
the outside of the vehicle.
C4 PARTS AND FUNCTIONS
a. Valve blade handle: opens and shuts the valve blade.
b. Removable seat and cover
c. Flush handle.
d. Waste tank level indicator: indicates when the waste tank is full.
e. Safety catch: holds the waste tank in place.
f. Storage compartment for toilet fluids (only the tall model).
g. Drainpipe for the flush water tank.
h. Drainpipe; also waste level indicator for the flush water tank.
i. Water filling funnel: turns outwards for easy filling of the water tank.
j. Valve blade opener.
k. Cover: guarantees optimal hygiene. Opens when the waste tank is
inserted into the toilet and closes when the waste tank is removed.
l. Valve blade / valve seal.
m. Vent plunger: for emptying without splashing.
n. Automatic pressure release vent: ventilates the waste tank when it
is inserted in the cassette toilet. Avoids excessive pressure build
up in the waste tank.
o. Upper handle: for easy carrying and emptying.
p. Handle.
q. Rotating emptying spout: ensures that the waste tank can be
easily and hygienically emptied.
r. Access door to waste tank and water filling funnel: lockable from
the outside of the vehicle.
INTRODUCTION
The Thetford cassette toilet is a high quality product. The functional
design combines modern styling with ease of use forming an
integrated part of your caravan or motorhome bathroom. The Cassette
toilet is manufactured from high quality synthetic material with a high
gloss finish. This makes it a durable and user & maintenance friendly
toilet.
The toilet is made up of two parts: a permanently fixed toilet and a
waste tank that is accessible from the outside. The removable waste
tank is located under the toilet and can be removed via a door on the
outside of the caravan or motorhome.
The Thetford Cassette toilet is the solution to all sanitary problems in
your caravan or motorhome!

PREPARING FOR USE

Points 1 to 3 only apply to models C2 and C4. If you have a C3
cassette toilet (connected to the central water system in your caravan
or camper), start at point 4.
- 1 -
C2 AND C4
1. Open the access door on the outside of your caravan and turn the
water filling funnel outwards. Remove the cap.
2. Add the stated amount of Thetford toilet fluid for the water tank via
the water filling funnel. This ensures a better and cleaner flush and
keeps the water in the flush tank fresh. After this fill the water tank
with clean mains water.
3. Screw the cap back onto the water filling funnel. Turn the water
filling funnel back inside against the side of the flush water tank.
Note: 150 ml water remains in the water filling funnel when the
water tank in empty.
C2 C3 AND C4
4. Remove the waste tank by pulling the safety catch downwards.
5. Pull the waste tank outwards to the stop. Tip it slightly and take
the tank out completely.
6. Place the tank upright and turn the emptying spout upwards.
7. Remove the cap, with the measuring cup inside, from the
emptying spout and pour the stated quantity of Thetford toilet
fluid into the waste tank. This quickly breaks down waste, avoids
unpleasant smells in the waste tank and keeps the inside of the
waste tank clean. Next add approximately 2 litres of water -
enough to ensure that the bottom of the waste tank is covered.
Screw the measuring cap back onto the emptying spout. Turn the
emptying spout back to its original position.
N.B.: The emptying spout cap is supplied in the same packaging
as this manual.
Warning! Never add toilet fluid via the valve blade or via the toilet
bowl. This is immediately with water in the waste tank.
8. Slide the waste tank back into its original position via the access
door.
Note! Never use force if you cannot get the tank back into place
easily. This may cause serious damage.
9. Make sure that the waste tank is secured with the safety catch.
Shut the access door and lock it.
USE
Point 10 is applicable to Cassette toilet models C2 and C3. If you have
a C4 Cassette toilet, start from point 11.
C2 AND C3
10. Run water into the bowl by pressing the flush button once. The
toilet may be used with blade open or closed. To open the valve
turn the valve blade handle in an anti clockwise direction. Your
Thetford toilet is now ready for use.
C4
11. Add water into the bowl by twisting the flush handle to the right.
The toilet may be used with blade open or closed. To open the
valve turn the valve blade handle in an anti clockwise direction.
Your Thetford toilet is now ready for use.
C2 C3 AND C4
12. After use open the blade (if it is still closed) by turning the valve
blade knob (C4) / flush knob (C2 and C3) to the left. Flush the
GB