Preparing For Use - Thetford C-200 Instrucciones De Manejo

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
29744-1212-V01 Binnenwerk_29744 binnenwerk 27-08-13 12:16 Pagina 1
GB
Instructions for use
PARTS
a. Removable seat and cover.
b. Swivelling toilet bowl.
c. Valve blade handle.
d. Flush button.
e. Waste holding tank level indicator: warning light
illuminates when the waste holding tank requires
emptying.
f. Rotating emptying spout: ensures that the waste
holding tank can be easily and hygienically emptied.
g+h.Automatic pressure release vent: ventilates the waste
holding tank when this is inserted into the cassette
toilet. Avoids excessive pressure build up in the waste
holding tank. N.B. A black hose is attached to the
automatic pressure release vent on some toilets. This
hose transports the air to the outside through an
access door or through the floor.
i. Upper handle.
j. Cover guarantees optimal hygiene. Opens when the
waste holding tank is inserted into the toilet and closes
when the waste holding tank is removed from the toilet.
k. Valve blade / valve seal.
l. Vent plunger: for emptying the waste holding tank
without splashing.
m. Handle.
n. Valve blade opener.
o. Access door.
C-200 CW / CWE PARTS
AND FUNCTIONS
a. Removable seat and cover
b. Swivelling toilet bowl.
c. Valve blade handle.
d. Flush water tank.
e. Level indicator: warning light illuminates when the
waste holding tank requires emptying.
f. Flush lever: the toilet flushes when the lever is moved
up and down.
g. Power supply for the level indicator:
two Penlite/AA 1.5 V alkaline batteries.
h. Waterfill door.
i. Rotating emptying spout: ensures that the waste
holding tank can be easily and hygienically emptied.
j+k. Automatic pressure release vent: ventilates the waste
holding tank when this is inserted into the cassette
toilet. Avoids excessive pressure build up in the waste
holding tank. N.B. A black hose is attached to the
automatic pressure release vent on some toilets. This
hose transports the air to the outside through a hatch
or through the floor.
l. Upper handle.
m. Cover: guarantees optimal hygiene. Opens when the
waste holding tank is inserted into the toilet and closes
when the waste holding tank is removed from the
toilet.
n. Valve blade / valve seal.
o. Vent plunger: for emptying the waste holding tank
without splashing.
p. Handle.
q. Valve blade opener
r. Access door.
INTRODUCTION
The toilet is made up of two parts: a permanently fixed
toilet and a waste holding tank that is accessible from the
outside. The removable waste holding tank is located
under the toilet and can be removed via an access door on
the outside of the caravan or motor home.

PREPARING FOR USE

1. Remove the waste holding tank by pulling the safety
catch upwards.
2. Pull the waste holding tank outwards to the stop. Tip it
slightly and take out the tank completely.
3. Place the tank upright and turn the emptying spout
upwards.
4. Remove the cap, with the measuring cup inside, from
the emptying spout and pour the stated quantity of
Thetford toilet fluid into the waste holding tank. This
quickly breaks down waste, avoids unpleasant smells
in the waste holding tank and keeps the inside of the
waste holding tank clean. Add approximately 2 litres of
water - enough to ensure that the bottom of the waste
holding tank is covered. Screw the measuring cap back
onto the emptying spout. Turn the emptying spout back
to its original position.
Warning! Never add toilet fluid via the valve blade or
via the toilet bowl.
5. Slide the waste holding tank back into its original
position via the access door.
Note! Never use force if you are having trouble getting
the tank back into place easily. This may cause serious
damage.
6. Make sure that the waste holding tank is secured with
the safety catch. Shut the access door and lock it.
Point 7 only applies to models CW / CWE.
CW / CWE
7. Open the water fill door and fill the flush tank with the
stated amount of Thetford Aqua Rinse. This keeps the
flush water fresh and improves the flushing. Next, fill
the flush water holding tank with clean water using a
jerry can or hose.
USE
8. Turn the toilet bowl to the desired position.
- 1 -
GB

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

C-200-sC-200-cs

Tabla de contenido