Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the inner lamp
A replacement bulb is available to you should the original stop working. If this is
the case, you can call customer service at the address listed in the
"WARRANTY" section to get a replacement bulb. Be sure to perform the
following steps carefully as they comprise of manipulating small glass parts.
1.
Unplug the appliance from the outlet and allow it to cool completely to
avoid electric shocks or burns.
2.
With a screwdriver, unscrew the screw holding the metal clamp against the
glass cover.
3.
Using a tool such as a flat-ended screwdriver, carefully remove the glass to
gain access to the lightbulb.
4.
Remove the lamp by shifting it upwards and ejecting the bi-pin end from its
place. To replace with new bulb, align the two pins with the small holes in
the original bulb base and plug back in, ensuring the new lamp is securely
in place.
5.
Place the glass cover back into a secure position, ensuring it fits neatly, and
screw the metal clamp back into its original position to prevent glass cover
from falling off.
Do not immerse the OVEN in water or any other liquid.
Any other servicing should be performed by an authorized service
representative.
www.KALORIK.com
30
AFO 51041 SS – 200605
Publicidad
