Sharp XE-A203 Manual De Instrucciones página 53

Programming for
1. Specify the key to program.
V
(1) Press the key to enter
Immediately after displaying "EXCHANGE PROG.",
guidance message for the next step will be displayed.
2. Text programming (Press
:
(1) Press key to enter text programming.
Immediately after displaying guidance message, the
current text data will be displayed.
(2) Enter the text.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" on
page 13 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
P
Pressing the
the right and left respectively.
s
(3) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
3. Rate programming (Press
(1) Enter the rate using numeric keys, using a decimal
point when setting fractional rates.
The rate can be set from 0.000000 to 999.999999.
Default setting is 0.000000.
s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
4. Open rate entry programming (Press
(1) Go to (2) when the open rate entry does not need to
be changed from "OPEN ENABLE". Otherwise,
:
press key to display "OPEN DISABLE".
:
Each time key is pressed, the display shows
"OPEN DISABLE" and "OPEN ENABLE" alternatively.
Default setting is "ENABLE".
s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
V
V
programming.
s
to skip. / Press
@
and key moves the cursor to
key to register the text.
s
to skip. / Press
key to register the rate.
s
key to register the setting.
1 2 3
Part Part Part
Key operation
A
to terminate.)
A
to terminate.)
0.939938
A
to skip. / Press
FOR THE MANAGER
Operator display
V
EXCHANGE PROG.
ENTER[00]KEY
:
ENTER TEXT
EXCH1
EX
EX
s
ENTER EX RATE
0.000000
0.939938
s
OPEN RATE ENTRY
OPEN ENABLE
to terminate.)
s
PRESET RATE
PRESET ENABLE
51