Publicidad
Idiomas disponibles
Idiomas disponibles
f To select forward rotation, push the forward/reverse
slider (3) to the centre position.
f To select reverse rotation, push the forward/reverse
slider to the left.
Warning! Never change the direction of rotation while
the motor is running.
Selecting the drilling mode
f For drilling in masonry, set the drilling mode selector
(3) to the
position.
f For drilling in other materials and for screwdriving, set
the drilling mode selector to the position.
Switching On and Off
f To switch the tool on, press the speed switch (1).
For tools with variable speed switch, the tool speed
depends on how far you press the switch. As a
general rule, use low speeds for large diameter
drill bits and high speeds for smaller diameter drill bits.
f For continuous operation, press the lock-on button (2)
and release the speed switch. This option is available
only at full speed.
f To switch the tool off, release the speed switch.
To switch the tool off when in continuous operation,
press the speed switch once more and release it.
MAINTENANCE
Keep guards, air vents and the motor housing as clear as
possible of dust and dirt. Wipe with a clean cloth and blow
through with a low-pressure air supply. Excessive build-up
of metal dust can cause tracking of electrical current from
the internal parts to exposed metal parts.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your product
are available from your local dealer or authorized service
center.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned and
authorized service locations. All BLACK+DECKER Service
Centers are staffed with trained personnel to provide customers
with efficient and reliable power tool service. For more
information about our authorized service centers and if you
need technical advice, repair, or genuine factory replacement
parts, contact the BLACK+DECKER location nearest you,
or visit us at www.BlackandDecker-la.com
SPECIFICATIONS
Power
Voltage
AR, B2C
B3
B2
BR
No-load speed
Blows per minute
Max drill capacity
Steel/Concrete
Wood
ENGLISH • 13
HD455
550W
220V ~ 50Hz
120V ~ 60Hz
220V ~ 50-60Hz
127V ~ 60Hz
0 - 3000/min (rpm)
0 - 45000gpm (bpm)
3/8" (10mm)
25/32" (20mm)
Publicidad
