Publicidad
Idiomas disponibles
Idiomas disponibles
• Screen display
>
"RUN" indicator
This light is on when the device is turned on.
The light flashes when the unit is performing a defrost or cold airflow test.
>
"TIMER" indicator
This light turns on when the timer has been set on the device.
>
"COMPRESSOR" indicator
This light comes on when the compressor is running (optional).
>
"TEMPERATURE" indicator
Indicates the set temperature on the screen.
When the F4, Fl or F2 error code appears on the screen, it means that the air conditioner is working
abnormally.
(The above LED display is for reference only, each product has a specific display for its model.)
• Observations
1.
Flashing of any indicator indicates that the air conditioner is operating abnormally, so please contact service
immediately.
2.
Function A:
The air conditioner will only display "RUN" indicator to save electricity if it does not receive any signal
from the remote controller after 30 seconds. If, on the contrary, it receives the signal from the remote control for the
second time, the screen continues to show the corresponding indicators.
Function B:
on-screen indicators can still be controlled with the "Display" button on the remote.
NOTE: Feature a or Feature b are optional and added to the device before it leaves the factory.
3. Please refer to the following pages if there is any difference from the above description of your air conditioner.
OWNER'S MANUAL
6
Publicidad
