Publicidad
Idiomas disponibles
Idiomas disponibles
• Energy saving SLEEP function
1. 1. When the air conditioner is on, press the "SLEEP" button to enter "SLEEP" mode on the remote control, this
symbol will appear.
2. 2. If you press the "SLEEP" button again,
cancelled.
Function A: in standby mode, the set temperature will rise after 1 hour of operation in cool and dry mode; will decrease after
1 hour of operation in heating mode. The set temperature will be controlled between 16°C and 32°C. When the air
conditioner is in SLEEP mode, the indoor fan speed is set to a medium level, but the user can change the fan speed with the
remote controller.
Function B: In standby mode, the set temperature and indoor fan speed will not change, but the display of the air conditioner
will be off except for the "RUN" indicator.
Careful maintenance and early inspection can extend the life of the air conditioner and reduce electricity bills.
Attention
1. Turn off the air conditioner with the remote controller and unplug it before
performing service and maintenance.
2. Do not stand on unstable objects when cleaning or maintaining the air conditioner,
otherwise it may cause injury.
3. Do not touch the metal part of the air conditioner body when removing the front
panel, otherwise it may cause injury.
• Cleaning the front panel and remote control
If the dirt cannot be removed, wipe it with a warm damp cloth (soaked in warm water below 40!)
Attention
1. Do not clean the device with water, it may cause electric shock.
2. Do not clean the remote control with water.
3. Do not clean with alcohol, benzine, oil or polish.
4. Please do not wipe the device violently, otherwise the front panel may fall off.
5. Do not clean the front panel or remote control with metal brushes; may damage the
surface.
OWNER'S MANUAL
�
will disappear and the sleep (energy saving) function will be
5. MAINTENANCE
12
:
\
,.,.
Publicidad
