Publicidad
Idiomas disponibles
Idiomas disponibles
Lap Belt Installation - DO NOT use in Booster Mode
Always review your vehicle owner's manual for specific information about
your vehicle seat belts.
Locking Latch Plate and No Retractor
When installing the car seat, route the lap
seat belt through the proper path and buckle
it in. Then, pull upwards on the tail of the
belt so that the lap belt gets tight around the
car seat.
Sewn On Latch Plate and ALR
Slowly pull the lap belt all the way out.
Route the vehicle seat lap belt through the
proper belt path and buckle it in. Then, pull
the lap belt tight while feeding all the slack
back into the retractor.
Grab the sides of the
seat at the belt path
and slide the seat
side-to-side and front-
to-back. The seat
should not move more
than 1" (2.5 cm).
87
Publicidad
