Garland AMAZON 400 XE Manual De Instrucciones página 26

English
8. TROUBLESHOOTING
Depending on the symptons of the machine, we can detect the probable cause of the problem and solve the
problem:
PROBLEM
Engine does not work
The engine works but
pumps little or no water
If you cannot solve the problem using this table, take your machine to your service dealer.
CAUSE
The machine is not connected
Damaged cable
Switch damaged
Brushes worn out
Turbine blocked
Impulsion tube obstructed
Turbine blocked
Water below the minimum level
26/88
ACTION
Plug the machine to the mains
Take the machine to the service dealer. Never
try and repair a cable with tape
Take the machine to the service dealer
Take the machine to the service dealer
Unplug the machine and remove the elements
blocking the turbine
Unplug the machine and remove the elements
blocking the tube
Unplug the machine and remove the elements
blocking the turbine
Stop the pump and lower the height with
respect the water