Publicidad
Idiomas disponibles
Idiomas disponibles
Radio mode
Radio mode
Start radio mode
In the main menu, press the Radio button.
The radio playback menu is displayed.
Select memory bank
erent memory banks and wavebands are available.
Up to 6 stations can be stored in each memory bank.
Press the
button repeatedly until the desired
memory bank is displayed.
FM1
FM2
FM3
AM1
Tuning into a station
Tuning into stations manually
y press the
or
eral times to change the frequency in increments.
Enter broadcast frequency directly
If the frequency of the desired stations is known, it can
be entered directly via the touchscreen.
Press the
button to display additional operat-
ing options.
Press the
button.
A numeric keypad is displayed for the frequency
input.
Enter the frequency of the desired station with the
numeric keypad.
Press the OK button.
The radio playback menu is displayed, the station of
the frequency entered is played back.
Starting station seek tuning
Press the
or
onds to start station seek tuning.
The radio tunes into the next receivable station.
Note:
For the reception area Europe: In the FM waveband,
c information stations are tuned into if the
c information is switched on.
26
AM2
FM1
button once or sev-
button for approx. 2 sec-
Storing stations manually
Select the desired memory bank with the
ton.
Set the desired station.
Press one of the memory buttons P1
approx. 2 seconds to store the current station at the
button.
The station is stored.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for and
ering the strongest reception
in the region in the current memory bank. Any previously
stored stations in this memory bank are deleted in the
process.
Select a memory bank.
Press the
button to display additional operat-
ing options.
Press the TS button.
The tuner starts the automatic station seek tuning.
After the storing is completed, the radio plays the
station at memory location 1 of the previously se-
lected memory bank.
Note:
For the reception area Europe: With switched-on pri-
stations are stored.
Scanning stations
You can use the scan function to play all the receivable
stations of the current waveband for a few seconds.
Press the
button.
The seek tuning searches for stations in the current
waveband. Each receivable station is played for a few
seconds in the process.
Pressing the
button again selects the currently
scanned station and plays it back.
Many FM stations broadcast an RDS (Radio Data System)
signal in addition to their programme in the reception
area Europe that allows additional functions, such as the
display of the station name.
Press the
button to display additional operat-
ing options.
Press the RDS button to switch the RDS function
.
If the RDS function is switched on, RDS is displayed
in white.
Press the
button to hide the additional oper-
ating options, or wait until they are automatically
hidden.
but-
P6 for
c information
Publicidad
