Keypad Locks; Locking And Unlocking; Key Override - Schlage BE365 Guía De Usuario

KEYPAD LOCKS

MODELS FE575— AUTO LOCK AND FE595— FLEX LOCK

Locking and Unlocking

Keypad locks are always locked from the outside, by default. Only the FE595 can be set to unlocked.
To Temporarily Unlock
»
If lighting is low, press the Schlage button to
illuminate the keypad before beginning.
1. Enter a User Code
into the keypad.

Key Override

Key Override can be used when the battery is completely dead, or when no valid User Code is known.
1. Insert key.
* Rotate the key back to starting position to relock. The key cannot be removed from the cylinder while the lock is
unlocked. See Changing the Battery on page 9 or Restore Factory Settings on page 15 for more information.
What is the difference between the Auto Lock and the Flex Lock?
The Auto Lock (FE575) is always locked from the outside. The Flex Lock (FE595) is normally
locked from the outside, but can be set to unlocked by putting the thumbturn in the vertical
8 8
position.
2. Rotate the lever to
open the door. Door will
automatically re-lock.
2. Rotate key 270° to unlock.
To Set to Unlocked (FE595 Only)
1. Rotate the inside
thumbturn to the
vertical position.*
* No User Code is required to open the door when the
lock is set to unlocked.
3. Rotate knob/lever to open door.*
2. Rotate the thumbturn
back to the horizontal
position to re-lock.